Zurück zu 200-301

Troubleshooting

CCNA 3 — ENSA · Modul 12 · Troubleshooting

SiteA# show interface TenGigabitEthernet0/1/0
TenGigabitEthernet0/1/0 is up, line protocol is up
  Hardware is BUILT-IN-EPA-8x10G, address is 780c.f02a.db91 (bia 780c.f02a.db91)
  Description: Connection to SiteB
  Internet address is 10.10.10.1/30
  MTU 8146 bytes, BW 10000000 Kbit/sec, DLY 10 usec,
     reliability 166/255, txload 1/255, rxload 1/255
  Encapsulation ARPA, loopback not set
  Full Duplex, 10000Mbps, link type is force-up, media type is SFP-LR
  5 minute input rate 264797000 bits/sec, 26672 packets/sec
  5 minute output rate 122464000 bits/sec, 15724 packets/sec

SiteB# show interface TenGigabitEthernet0/1/0
TenGigabitEthernet0/1/0 is up, line protocol is up
  Hardware is BUILT-IN-EPA-8x10G, address is 780c.f02c.db26 (bia 780c.f02c.db26)
  Description: Connection to SiteA
  Internet address is 10.10.10.2/30
  MTU 8146 bytes, BW 10000000 Kbit/sec, DLY 10 usec,
     reliability 255/255, txload 1/255, rxload 1/255
  Encapsulation ARPA, loopback not set
  Full Duplex, 10000Mbps, link type is force-up, media type is SFP-LR
  5 minute input rate 122464000 bits/sec, 15724 packets/sec
  5 minute output rate 264797000 bits/sec, 26672 packets/sec

Beziehen Sie sich auf das Exhibit. Kurz nachdem SiteA über einen neuen Singlemode-Faserpfad mit SiteB verbunden wurde, melden Benutzer in SiteA intermittierende Verbindungsprobleme zu Anwendungen in SiteB. Was ist die Ursache?

Antwort wählen

Zum Markieren bitte anmelden: Anmelden